THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES
  • THINKSCAN PLUS SERIES

THINKSCAN PLUS SERIES

$125.00
Version
Quantity

$30 OFF CODE FOR THINKSCAN PLUS SERIES: THINKSCANS

THINKCAR Thinkscan Plus Series Professional Diagnostic Tool

Diagnostic Scan Tool with ABS Bleeding Airbag SAS TPMS Reset Oil Sevice Check Engine Light Code Reader & Battery. THINKSCAN Plus Series supports to 7 Systems(ECM/ABS/SRS/TCM/BCM/AC/IC) and you could choose 5 Reset services lifetime free.

  • Support to diagnostic ECM/ABS/SRS/TCM/BCM/AC/IC system errors, and delete the errors.
  • Supports to do Full obd 2 function,including Read/Clear codes,data stream,I/M readiness,O2 sensor,DTC look up and more....
  • Thinkscan Plus S7 can do 5 reset revices functions like you choose.
  • You can do screen shortcuts via I/M key with Thinkscan Plus S7 devices, easy and fast.
  • Support to printe Diagnostic Report data, checking errors.
  • Software update free lifetime.

Thinkscan Plus S7 products are a new generation of mid-to-high end DIY products based on Android system launched by THINKCAR, which can realize online upgrade of diagnostic software. Its main functions include not only OBD2/EOBD standard protocol diagnosis, but more importantly, it has professional vehicle diagnostic software and maintenance software, which can perform a comprehensive diagnosis of all vehicle electronic control systems. 

Full OBD II Function

【Full EOBD/OBDII Basic Function + Live Data】

Thinkscan Plus S7 OBD2 Scanner Code Reader supports to do Full obd 2 function, including Read/Clear codes, data stream, I/M readiness, O2 sensor, EVAP system, DTC look up and more....

You can select data stream you need from "Long/Short Term Fuel Trim" "Vehicle Speed Sensor" "O2 Sensor Output Voltage" "Engine RPM" and etc. to show the live data stream.

support-28-reset-services

【Dashboard Display + Auto-Test Battery Voltage】

After the car is ignited, once connected to the car DLC, the main interface of ThinkScan Plus S7 will have a small dashboard indicator to indicate that the connection is successful; Once connected, the OBDII Scanner will automatically diagnose the battery voltage and show you the battery graph. Just drop down the menu bar.

Support 5 System Diagnostic

This car obd2 scanner is capable of reading and clearing trouble codes of ECM/TCM/ABS/SRS/BCM Engine.

  • Free Engine system Diagnostic: You can diagnose the engine system via ecu obd2 port, support all 10 OBDII test modes, such as live data, O2 sensor test, component test and more;read and clear the engine error codes, find out the exactly problem, repair it, and turn off the MIL engine light.
  • Free ABS system Diagnostic: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you.
  • Free Auto Transmission System: AT is a set of transmission used to coordinate the engine speed and the actual speed of the wheel, which is used to give full play to the best performance of the engine. THINKSCAN609 obd2 scanner can read/clear codes and view live data retrieve the error information from AT.
  • Free SRS system Diagnostic: Safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status.
  • Chassis System(BCM) Diagnostic: Carry out fault diagnosis on body/frame/transmission system/steering system/brake system/driving system.

28 maintenance reset services

THINKSCAN Plus S7 currently supports 28 maintenance software.

The maintenance software is completely free to use and free to upgrade. You Can Choose 5 Reset Service as Lifetime Free from 28 Maintenance Service

1. Oil Lamp Reset Service.

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2. EPB Electronic Park Brake Reset.

It is important in the maintenance of electronic braking system's safety and efficiency.

3. BAT battery service.

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4. DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5. SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7. IMMO Key Programming

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8. ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9. Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10. Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11. Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12. AFS Headlamp

Reset 'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13. Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14. Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15. Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16. EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17. A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

18. Adblue Reset (Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19. Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

20. Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

21. AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22. Language Change

This function is used to change the system language of the vehicle central control panel.

23. Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24. ODO Reset

ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODO reset after maintenance.

25. Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26. Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

27. Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the  automatic ascending and descending function of power window.

NOTE:If you need more special functions, you need to pay an additional $19.95 /year for a function.

【DIY 5 Reset Services from 28 Reset Services】

This car scanner support EPB Brake, SAS, DPF Regen, GearBox Reset, SUN Reset, ABS Bleeding, TPMS Reset, Oil Service, IMMO Reset and so on. There are 28 reset functions optional. You can choose 5 reset service for free lifetime and free update lifetime, just DIY what you need.

?Tips: For Extra Reset, we should pay USD$29.95 per year per reset to purchase.

【Scan QR Code to Share & Print + Type-C Port】

Unlike most OBDII products on the market, ThinkScan Plus S7 OBD2 Scanner support scan the QR code to share where you want and print it after obtaining the diagnostic report. You can also Connect Type-C to the computer via the datas cable to export any data you want; Convenient and fast, keeping up with the trend of the times. And you can also Semi-Auto VIN your vehicles at anytime, manual diagnosis is also available.

【ScreenShot + Screen Recorder + Wi-Fi Free Update】

We also have two excellent advantages, that is, when you enable the screenshot and screen recording functions in the settings, you can start to take screenshots and screen recordings, they will finally be saved in "Photo album" and "Screen recorder" Under the " Settings". Besides, you can update softwares free lifetime.

【Support More Than 120+ Car Models + Multiple Languages】

ThinkScan Plus S7 diagnostic scanner cover all vehicles that support the OBD protocol after 1996, like For AUDI , For BENZ , For BMW , For CHRYSLER, For CITROEN , For DACIA , For DAEWOO , For FIAT, For GM , For HOLDEN , For HONDA , For HYUNDAI, For JAGUAR , For TOYOTA , For USAFORD, For VOLVO , For VW and etc. Support English, Spanish, Portuguese, French, Japanese, German, Italian and Russian.

Support more than 120+ car models

【Scan QR Code to Share & Print + Type-C Port】

Unlike most OBDII products on the market, ThinkScan Plus S7 OBD2 Scanner support scan the QR code to share where you want and print it after obtaining the diagnostic report. You can also Connect Type-C to the computer via the datas cable to export any data you want; Convenient and fast, keeping up with the trend of the times. And you can also Semi-Auto VIN your vehicles at anytime, manual diagnosis is also available.

Different series support different systems and functions.

【Plug and Play + Big Holder + 5'' TouchScreen】

  • Memory: 1G
  • Storage Capacity: 16G
  • Battery: 600mAh/3.7V 
  • OBD2 Cable: Integrated Undetachable Design. No worry of cable missing.
  • Holder: Big Anti-slip design.
  • Plug in and play, easy to carry.
  • Sensitive 5'' large screen with Android 6.0, you can display the interface you want with a flick of your finger, come and go freely.
  • Any problem, please feel free to ? us with your serial number, car model and year.

Packing list

3.03.02.0019
19 Items

Data sheet

OS
Andriod 6
CPU
MT6580 CORTEX-A7 1.3GHz
Storage capacity
1G+16G
Screen size
5inches
Storage environment
-20°C~60°C
Working environment
-10°C~50°C
Working voltage
9~18V
Working current
≤250mA

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
a
ari
S7 thinkscan

good diag works fine

D
Dwayne Mathes
THINKSCAN PLUS SERIES

Works great with detailed instructions for my Hyundai Santa Fe

C
Chris F
This is one of the best around.

It downloads software on your phone to interface with, but by doing so, it gives the best chance of knowing what is actually going on with your car. While I have not yet been able to figure out whether this device can actually be used to program the car's features (like rolling windows down on unlocking via fob and other "dealer" programable options, this does absolutely everything else I might want or need.

R
Ramon Morales
Great scan tool

Simple to use touchscreen, can be used on virtually all makes form what I can see. Great value for the price 10/10 would highly recommend. Easily give this product 5 stars.

S
Stanley Joe Wynman
This scanner is amazing

Can access all the major systems in my cars. Also for testing that usually take hours to perform in minutes. Responsive touch screen. For car brands only download those you need. Updates with a few touches. It already paid for itself with the first car repair I did which involves a purge valve. Identifies the bad valve then it allowed me to control its operation to verify the failure.

Online Service